Author Topic: Backglass issue  (Read 1984 times)

0 Members and 1 Guest are viewing this topic.

Offline viktory2k1

  • Autistic Genius
  • Newbie
  • *
  • Posts: 10
  • Country: us
  • Karma: +0/-0
Backglass issue
« on: November 22, 2015, 01:08:39 AM »
Hi, I am running vp and pinballx and for some reason, every table I downloaded from here, the backglass is way to big for my2nd monitor, like half is cut off, the thing is as this is just a test setup and I am using the 46" that is going in the cab but the backglass monitor I am using for testing is a 19" 4:3. Is that why these Db2s backglasses are too big for this monitor? The one in the cab is a 32" 16:9 and I am kinda thinking these backglasses are designed for that. Is that what is happening? Vic

Offline Itchigo

  • Victory is mine!!
  • Administrator
  • Pinball Wizard
  • *****
  • Posts: 1,292
  • Country: us
  • Karma: +6/-0
Re: Backglass issue
« Reply #1 on: November 22, 2015, 07:29:56 AM »
but the backglass monitor I am using for testing is a 19" 4:3.
The one in the cab is a 32" 16:9

There's your problem. These are 2 different screen resolutions. All you have to do is change your scrnres.txt to match your 4:3, and they won't be cutoff. But, when you move from your test setup to your cab, you'll have to change that back.

Tremble in fear! Behold my Bankai!


Offline viktory2k1

  • Autistic Genius
  • Newbie
  • *
  • Posts: 10
  • Country: us
  • Karma: +0/-0
Re: Backglass issue
« Reply #2 on: November 23, 2015, 01:01:02 AM »
Not sure if I want to change it for my test setup because it will screw up the ones the are fine. Thank you for the answer, I thought it was that.