Rogue Pinball

Visual Pinball Cabinets => Cabinet Pictures => Topic started by: tassie2 on January 22, 2018, 03:15:53 PM

Title: cabinet build in Tasmania Oz
Post by: tassie2 on January 22, 2018, 03:15:53 PM

hello all.
Am a new interested new builder down in Aussie.Sites like this are a great help..
In last month have made a repro wide body wooden cabinet and back board,
got a good 2 hand 43inch playfield tv and had a 20 inch back monitor from
an ex RaspPi arcade table I had made in past. Used the a buttons and controller to
get it running . Used old fridge  castings and car dash for decoration.
works good have 60 tables running.Pinball x and VP 9xx.
Have a 2 screen setup so far.. A few pix of what I've done. Have it on a mobile
 base to suit my house . All set for heights of real cabinet..Lockdown plate is
top off a stainless steel pie warmer.. Cosmetics to follow. All been good fun..
A real learning process.. Nick Tasmania here..

Title: Re: cabinet build in Tasmania Oz
Post by: tassie2 on January 22, 2018, 03:29:59 PM

Some pics of build.
1950 Holden casting dash on front door.
Mouli mix grater blades for speaker grills.
Funeral latch on door.
big 1850s brass hinge.

on rear screen box.. 1950s space age aluminium castings off an old fridge.
Case is 3/4 inch plywood. Had some LED  sound activate light strips for rear.
Is just a bitzer build. Paint it with old fashioned pinball case stencil flashes and get some side rail glass covers next..
Used a 5yo desktop to drive it all. Going ok so far. 60 tables going..

Title: Re: cabinet build in Tasmania Oz
Post by: Itchigo on January 23, 2018, 07:05:30 AM

Very nice, and I love Trident! Most of the tables here are geared to what you have- 2 screen vp9 tables. We have the largest 2 screen working vp9 collection at 794 tables.