Visual Pinball > VP Tools

How to use the B2s Backglass Editor for playfields and plastics

<< < (3/3)

Itchigo:
I think you got it right. Normally I put them both together, but in this case I'd put the table up, then put the backglass up separately. Then in the table download I'd link to the backglass/rom.

xenonph:
I just finished downloading all your tables in the Itchy's Cabinet Download Section.
There are some great tables in this section. (Specifically the older Tables.)
And I assume the Tables are all setup to use the dB2S Backglasses, (No need to change anything in Table Script)
This is great!! Not sure if you have seen the Tutorial over at VPForums for using dB2S Backglasses for DT Table 1 monitor users, but I have been wanting to add info on getting working the NON-VPM or Backglasses that don't use ROM's. I will study these scripts, and see what info I can pass onto others in that Tutorial.

On a side note..I have just fixed the Goal Keeper Magnet in the NFL (Stern 2001) Table Mods.
I used the Spanned version to create these Mods, and apparently the Goalkeeper Magnet wasn't updated to work. The only version that has a working Goalkeeper Magnet was the VP8 DT version.
With allknowing2012's help, I was able to find the proper location for these Goalkeeper Magnets and updated the script.

As I noted before I was unable to upload My NFL Table MOD's due to the 47MB File Size Limit.
When I update these NFL Table Mods to use the Goalkeeper Magnet, They will be Version 5.1
I noticed that some of the files I downloaded from your Itchy's Cabinet Section were over 50MB.
If you want to make these available on your Site here, (Seeing how I am unable to upload them as they are over 50MB each), You have my permission to download them over there and then put them in your itchy's Cabinet section or anywhere else on this Site. But I would ask that you wait for the v5.1 versions as the Goalkeeper Magnet will work on these.
I also will be updating the original NFL Spanned version to use the Goalkeeper Magnet, and the Original FS version.
I dont see any other way of making these available on your site,(as I cannot upload more than 50MB File Size)
So if you want, just download the v5.1's and you can make them available here however you want and whatever category you want.

The first three tables I have converted to use the Goalkeeper Magnet are

Seahawks v5.1
FS DT dB2S Multi-BG versions

Broncos v5.1
FS DT dB2S Multi-BG versions

Eagles v5.1
FS DT dB2S Multi-BG versions

They are still awaiting approval, but should be approved soon.(I hope.)

Or do you have another way of me uploading a Table thats over the File Size Limit here?
I could try and cut them down by getting rid of the most of the music and just have the basic football sounds. Then take out all the extra Decals and other things that are customizable, so it wouldn't be customizable. Thought I would ask if there was another way, because i would rather not cut it down, but will if there is no other way.

Let me know, and I will let you know when the First 3 tables are approved.
Thanks for your time sir.

Keep on Pinballin'

Itchigo:
Thanks!! For no rom tables, download my table template. It is a 2 screen tamplate, but with Direct b2s precoded in which should give you an idea how to do it. :Smile:

All the table in Itchy's cab (™) are either Direct b2s OR b2s. For 2 screens there is no modification needed. When I have a 2 screen ready to go on my cab I copy it and saved it there.

How big are your tables? I can change the 47 mb limit (thought I had it at 50mb) but I want to see how far over are you. You could upload the table by itself and the backglass by itself, and link to the backglass in the table download.  :Study:

There is NO approval here. Once you put it up- it's ready to go. :Smile:

Navigation

[0] Message Index

[*] Previous page